A trial run using the luminescent powder in the clear casting resin wasn’t the complete success I was hoping for. Having filled the moulds with the clear resin I then mixed the powders with small amounts of resin I’d set aside. The idea was to add these mixtures to the resin in the mould and create effects. Unfortunately the weight of the powder mixture was too heavy and most of it sunk to the bottom (top of finished piece).
There is no lighting used here other than the ambient light given off by the photo-luminescent powder in the resin. Although the surface of the smaller droplet is somewhat clearer than the larger one, both require complete wet & dry sanding and polishing. This will in turn vastly improve the effect and appearance of the resin droplets.